EQ-232 TELESCOPE CONTROL
The adapter is designed to connect via RS-232 protocol to any compatible hand-controller, allowing bi-
directional comunication between the hand-controller and any ASCOM compatible telescope control
software or your brand telescope control software.
Also suitable for firmware update.
http://www.ascom-standards.org
http://eq-mod.sourceforge.net
Driver Windows x64/x86 Server/2000/XP/7/8/10, Mac, Linux, Android
OPERATION
Download and install ASCOM telescope control software: http://www.ascom-standards.org
After install the adapter a serial COM port will be created on your device manager, you need to check
the COM port config is the correct:
Bits per second: 9600
Data bit: 8
Parity: None
Stop bits:: 1
Flow control: None
Configure the telescope control software/ASCOM software to conect throught the correct COM port
number and connect it.
FEATURES
Cable lenght: 2,4 metters (8.2 feet).
Hight quality shielded USB cable avoids data transmission lost and software disconnection.
Package content: EQ232 adapter for a mount of your choice
This table gives you a reference to mach your mount EQ232 model:
EQ232 Synscan: All Skywatcher / Orion / EQ / AZ Synscan hand controllers
EQ232 Nexstar: Celestron CGEM CGE CPC SLT SE CGX VX CG4
EQ232 Astromaster: Celestron Astromaster only
EQ232 Autostar: Meade ETX-90 ETX-125 LX80 LX90 LXD55 LXD75 LX850 Audiostar / Autostar 497
EQ232 LX200: Meade LX200 Classic, GPS
EQ232 Gemini: Losmandy Gemini
€21,90
