This site use cookies to improve user experience, if continue browsing we consider you accept their use. OK More info
                                      EQ-232 TELESCOPE CONTROL The adapter is designed to connect via RS-232 protocol to any compatible hand-controller, allowing bi- directional comunication between the hand-controller and any ASCOM compatible telescope control  software or your brand telescope control software. http://www.ascom-standards.org http://eq-mod.sourceforge.net Driver Windows x64/x86 XP/7/8/8.1/10/10.1  EQ-232 COMPATIBLE MOUNTS CELESTRON:            Nexstar, CGE, CGX, CGEM, CPC, SLT, SE, Astromaster ORION:                      Cualquiera con un mando Synscan, Intelliscope SKYWATCHER:         Cualquiera con un mando Synscan MEADE:                     ETX, Lx90, LXD55/75, LX200, GPS STELLARCAT:           Servocat WILDCARD:               Argo Navis LOSMANDY:              Gemini TAKAHASHI:              EM-200 OTHERS:                   Contact OPERATION Download and install ASCOM telescope control software: http://www.ascom-standards.org After install the adapter a serial COM port will be created on your device manager, you need to check the COM port config is the correct: Bits per second:   9600 Data bit:               8 Parity:                 None Stop bits::            1 Flow control:       None Configure the telescope control software/ASCOM software to conect throught the correct COM port number and connect it. FEATURES Cable lenght: 2,25 metters. Weight 60 grams Very low latency (12ms) Package content: EQ-232 adapter for a mount of your choice
PRODUCTS PRODUCTS PURCHASE & SHIPPING PURCHASE & SHIPPING CONTACT/SUPPORT CONTACT/SUPPORT GALLERY GALLERY BTDir EQ6 BTDir EQ6 SKYLINK SKYLINK BTDir HEQ5 BTDir HEQ5 EQDir EQ6 EQDir EQ6 EQDir HEQ5 EQDir HEQ5 EQ-232 EQ-232
Select model:
COOLED DSLR COOLED DSLR
37,90